共找到 220 條與 通用核儀器 相關的標準,共 15 頁
Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
本標準規定了安裝在核電廠的地震儀表系統的最低要求。 本標準適用于陸上輕水堆核電廠用于監測的地震儀表系統,其他類型核設施的地震儀表系統也可參考執行。 本標準不適用于: a) 在達到預定地面加速度時,自動觸發停閉核電廠的地震儀表系統; b) 地震儀表記錄評估的程序和數據處理。
Earthquake instrumentation criteria for nuclear power plants
本標準規定了核電廠地震儀表記錄數據及時獲取、處理和存儲的準則,包括初始的評估準則,判斷廠址的地震動是否超過電廠運行基準地震(0BE)。 本標準適用于陸上輕水堆核電廠,其他類型核電廠也可參考使用。 本標準不適用于下列程序: a) 在地震后需要立即執行的電廠巡檢程序(8h內); b) 確保安全、有序停堆的程序; c) 構筑物和設備響應數據的長期評估的程序; 電廠重新運行的程序。
Criteria for the handling and initial evaluation of records from nuclear power plants seismic instrumentation
Specifies the data format that shall be used for both required and optional data available at the output of radiation instruments for homeland security applications. The performance requirements for these types of instruments are described in other standards; such as, ANSI/IEEE N42.32, ANSI/IEEE N42.33, ANSI/IEEE N42.34, ANSI/IEEE N42.35, and ANSI/IEEE N42.38.
Data Format Standard for Radiation Detectors Used for Homeland Security
American National Standard Data Format for Radiation Detectors Used for Homeland Security
Data Format for Radiation Detectors Used for Homeland Security
Radiation protection instrumentation - Cargo/vehicle radiographic inspection system
This International Standard establishes test procedures for photomultiplier tubes (PMT) for scintillation and Cherenkov detectors. This standard is applicable to photomultiplier tubes for scintillation and Cherenkov detectors. Photomultiplier tubes are extensively used in scintillation and Cherenkov counting, both in the detection and analysis of ionizing radiation and for other applications. For such uses, various characteristics are of particular importance and require additional tests to those conducted to measure the general characteristics of PMT. This has made desirable the establishment of standard test procedures so that measurements of these specific characteristics may have the same significance to all manufacturers and users. The tests described in this standard for PMT to be used in scintillation detectors are supplementary to those tests described in IEC 60306-4, which covers the basic characteristics commonly requiring specification for photomultiplier tubes. This recommendation is not intended to imply that all tests and procedures described herein are mandatory for every application, but only that those tests carried out on PMT for scintillation and Cherenkov detectors should be performed in accordance with the procedures given in this standard.
Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures
本標準規定了對核電廠安全級儀表和控制設備中電子元器件進行老化篩選和降額使用時的技術要求。 本標準適用于核電廠安全級儀表和控制設備的電子元器件老化篩選及降額使用,也可供其它安全級電氣設備的電子元器件老化篩選及降額使用時參照或參考使用。
Ageing,screening,and derating, rules of electronic elements and devices in safety class instrument and control equipment of nuclear power plants
? ??? ??? X-? ??? ???? ?? ?? ????? ????. ?? ??? ??
Standard test procedures for semiconductor X-ray energy spectrometers
? ??? ????? ??? ???(fission ionization chamber)? ?
Digital counting ratemeters-Characteristics and test methods
? ??? ?? 1 ? ?? 2? ?? ??? ??? ??? ?????(PWR)? ????
Nuclear reactor instrumentation- Pressurized light water reactors(PWR)- Monitoring adequate cooling within the core during cold shutdown
? ??? ????? ??? ???? ?? ???? ?? ????, ? 0.1?? ? 10
Analogue counting ratemeters-Characteristics and test methods
This standard provides the specifications for the design, fabrication, and quality of new BOMAB phantoms. It is not intended to be applied to phantoms manufactured prior to the issuance of this standard.
Specifications for the Bottle Manikin Absorption Phantom
Nuclear instrumentation - Constructional requirements and classification of radiometric gauges.
This ANS provides a procedure for testing the performance of extremity personnel dosimetry systems used to monitor the personnel exposure to the extremities from ionizing radiation.
Performance Testing of Extremity Dosimeters
This part of ISO 6980 specifies the requirements for reference beta radiation fields produced by radionuclide sources to be used for the calibration of personal and area dosemeters and dose-rate meters to be used for the determination of the quantities Hp(0,07) and H'(0,07), and for the determination of their response as a function of beta particle energy and angle of incidence. It gives the characteristics of radionuclides that have been used to produce reference beta radiation fields, gives examples of suitable source constructions and describes methods for the measurement of the residual maximum beta particle energy and the dose equivalent rate at a depth of 0,07 mm in the International Commission on radiation units and measurements (ICRU) sphere. The energy range involved lies between 66 keV1) and 3,6 MeV and the dose equivalent rates are in the range from about 10 μSv h-1 to at least 10 Sv h-1. In addition, for some sources variations of the dose equivalent rate as a function of the angle of incidence are given. This part of ISO 6980 proposes two series of beta reference radiation fields, from which the radiation necessary for determining the characteristics (calibration and energy and angular dependence of response) of an instrument can be selected. Series 1 reference radiation fields are produced by radionuclide sources used with beam flattening filters designed to give uniform dose equivalent rates over a large area at a specified distance. The proposed sources of 90Sr + 90Y, 85Kr, 204TI and 147Pm produce maximum dose equivalent rates of approximately 200 mSv h_1. Series 2 reference radiation fields are produced without the use of beam-flattening filters, which allows large area planar sources and a range of source-to-calibration plane distances to be used. Close to the sources, only relatively small areas of uniform dose rate are produced, but this series has the advantage of extending the energy and dose rate ranges beyond those of Series 1. The radionuclides used are those of series 1 with the addition of the radionuclides 14C and 106Ru + 106Rh; these sources produce dose equivalent rates of up to10Svh-1.
Nuclear energy - Reference beta-particle radiation - Methods of production
This standard establishes performance and design criteria, test and calibration requirements, and operating and training instruction requirements for portable radiation detection instruments used for detection and measurement of radioactive substances fo
Portable Radiation Detection Instrumentation for Homeland Security
This standard describes the testing methods used to evaluate the performance of instruments that are carried on the body and used to detect the presence and magnitude of radiation from sources encountered by first responders. This standard does not apply
Criteria for Alarming Personal Radiation Detectors for Homeland Security
Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號
頁面更新時間: 2025-06-06 11:24